Whatsapp: 86 18153792542 Email: mt15@mitr.cn
QM-QX1L Omnidirctional Planetary Ball Mill
Application：
The ball millused high-tech chip controlof micro computer.It can alternately ofcorotationand reversal(0-999min)andpause.It is especially suitable for cooling or intermittent operation.
Category：
You can send us an email：mt15@mitr.cn
SEND A MESSAGE：mt15@mitr.cn Inquire Now|
Brand Name |
MITR |
|
Model |
360 degree rotating planetary ball mill-MITR-QMQX-1L |
|
Grinding tank volume（ml） |
50ml-250ml |
|
Materialof grinding jar |
Metal material：304 stainless steel、Tungsten carbide（YG8) |
|
ceramic / corundum / alumina, zirconia, agate |
|
|
High polymer material：Nylon, polyurethane, polytetrafluoroethylene(PTFE) |
|
|
materialof grinding ball |
Stainless steel,ceramic,corundum,alumina,zirconia, agate, tungsten carbide |
|
Maximum loading per jar |
Raw material and grinding ball are not exceed2/3 of grinding jar |
|
Feeding granularity |
Friable material less than 10mm,others less than 3mm |
|
Discharging granularity |
Minimum downto0.1μm |
|
Grinding Method |
Dry/wet/ high energy alloying/vacuum (need customized) / low temperature grinding(need customized） |
|
Planetary speed |
Max Revolution 0-450r/min，Rotation0-900r/min Planetary total speed：0-3600r/min |
|
360 degree speed |
1-14RPM |
|
speed ratio（revolution:rotation） |
1:2 |
|
Adjusting speed control method |
PLC Frequency conversion control system,Touch screen control system |
|
Driving mode |
Gear drive |
|
Grinding ball ratio(the detail ratio contact customer service)The right sheet is just for reference.In fact that we are matching according to the customer requirement. |
Usuallygrinding over 800 mesh(5mm;10mm;15mm) feeding material less than 3mm |
|
Fine grinding 800-1500 mesh(3mm;5mm;10mm;)feeding material less than 1mm |
|
|
Super fine grinding over 1500 mesh(0.1~10μm)(1mm;3mm;5mm)feeding material less than 200 mesh |
|
|
Voltage |
220V |
|
Power |
0.55Kw |
|
Working method |
Two or four cans working at the same time |
|
Maximum continueworking time |
72h（Timing 0-9999h） |
|
Programmed control |
The ball millused high-tech chip controlof micro computer.It can alternately ofcorotationand reversal(0-999min)andpause.It is especially suitable for cooling or intermittent operation. |
|
Weight |
170kg |
|
Dimension |
95*55*65 |
MESSAGES