Jaw Crusher with Air Pump
Description:
Jaw crusher belongs to one of the many crushers, mainly used in a variety of ores, metallurgy, mining, chemical industry, building materials, refractory materials, ceramics, environmental protection, materials, biology, etc., mainly by the movable jaw plate periodic pressure to the fixed jaw plate, will be squeezed in the material crushed, to obtain the most fine 1mm material.
Category:
SEND A MESSAGE:mt15@mitr.cn Inquire Now
Product introduction
The use of two jaw plate extrusion and bending of materials, coarse or medium crushing of various hardness materials crushing machinery in the laboratory crusher belongs to the front section of material processing equipment, is one of the essential processing in the crushing stage, the process is simple and easy to use, the jaw plate is simple and adjustable, the adjustment process can be intuitively displayed on the display screen jaw plate spacing, convenient for operators to grasp the sample diameter discharge diameter. Suitable for materials with diameter less than 30mm. After crushing, the material can be adjusted between about 1-13mm. Solve high purity sample pretreatment process. The power supply is 220v.
Not only the design of the high appearance level, the design of the structure and system more effectively improve the efficiency and performance, but also the application of the patented noise control technology brings a more comfortable and safer experience.
Product characteristics
1)Final sample size (d90<1mm)
2)Speed up to 620rpm
3)Four different materials to crush the jaw plate
4)Air blowing dust removal design, clean discharge; The right interface of the crusher can be connected with the air pump to start the built-in dust removal function, and the external air gun can also be used to remove dust around the equipment.
5)Mechanical digital display function, real-time display of jaw plate spacing for easy adjustment (left tight, right loose)
Main technical parameters
Model |
MT-10S |
MT-10M |
MT-10Y |
MT-10T |
Material of board |
corundum |
Manganese steel |
zirconia |
Tungsten carbide |
Feed port size |
100*70mm |
|||
Feed size |
≤30mm |
|||
Spacing of board |
1-13mm |
|||
Throughput |
1-300kg/h |
|||
Power |
0.75kw |
|||
Weight |
95kg |
|||
Dimension |
500*600*600mm |
|||
Crushing hardness |
≤ Mohs 5.0 |
≤ Mohs 7.0 |
≤ Mohs 7.5 |
≤ Mohs 9.0 |
Introduction of crushing effect
1、Long service life, low overall operating cost.
2、Fully sealed environmental protection design, can be connected to dust collector.
3、Small dust, low noise, stable operation.
4、The fineness of the discharge port is adjusted by the adjusting device.
5、Suitable for clean crushing of high purity materials.
Previous
Previous
MESSAGES