Whatsapp: 86 18153792542 Email: mt15@mitr.cn
How to grind laboratory herbs into powder?
Release time:
Jun 17,2025
The laboratory herb grinder is mainly used for grinding various herbs, granules, powders, and other hard materials.
The following is the usage process of a general laboratory herb grinder:
1. Preparation work: Confirm whether the power connection, grounding, etc. of the laboratory herb grinder are normal. Clean and disinfect the grinding chamber, grinding blades, and other components of the grinder.
2. Add medicinal herbs: Place the herbs to be ground into the grinding chamber, taking care not to exceed the quantity to avoid overloading.
3. Set grinding parameters: Adjust the grinding time, speed, power, and other parameters of the grinder as needed to achieve the desired grinding effect.
4. Start the machine: Close the lid of the grinding chamber, start the laboratory herb grinder, and begin the grinding process. During the grinding process, the grinding effect can be observed in a timely manner, and parameters can be adjusted or stopped for inspection.
5. Screening and Separation: As needed, a screening device can be used to screen the ground particles or powders, and the screened products can be used for the next experimental or production work.
6. Turn off the machine: After grinding is complete, confirm that there are no medicinal residues in the grinder, turn off the power, clean and disinfect the grinding chamber and grinding blades and other components.
7. Record and organize: Record the types, quantities, grinding parameters, and other information of the ground medicinal materials, and organize and archive relevant materials.
keywords
Previous Page:
Previous Page: